Mega Flood Log

A white background with a few lines on it

The Flood Panel Mega Flood Log by Floodproofing.com is a modular system designed to withstand high-velocity water loads and to be highly resistant to heavy impact forces (hydrostatic flood and hydrodynamic loads calculated per ASCE 7-10 with 8 FT/S maximum water velocity). Tested to protect at higher flood heights, it is particularly applicable to flash flood and hurricane-prone locations in both small and large installations. It has a long and proven history as an effective flood barrier in all flood-prone areas of the world and is one of the systems preferred by most of the larger insurance companies and governments.

The Mega Flood Log passed rigorous certification testing to perform in floods up to six feet, higher than required by International Building Code based on standards set by the Federal Emergency Management Association and FM Global, the world’s largest business and property insurer.

The Super Flood Log flood barrier is a modular system designed to withstand high-velocity water loads and to be highly resistant to heavy impact forces (hydrostatic flood and hydrodynamic loads calculated per ASCE 7-10 with 8 FT/S maximum water velocity). Tested to protect at higher flood heights, it is particularly applicable to flash flood and hurricane-prone locations in both small and large installations. It has a long and proven history as an effective flood barrier in all flood-prone areas of the world and is one of the systems preferred by most of the larger insurance companies and governments.

The Super Flood Log passed rigorous certification testing to perform in floods up to six feet, higher than required by International Building Code based on standards set by the Federal Emergency Management Association and FM Global, the world’s largest business and property insurer.

A building with a canopy and flood barriers in front of it

The system itself can be installed either across specific openings or as a perimeter defense. The system comprises of “C” shaped support posts and hollow aluminum beams, the ends of which mount (slide) down between the jaws of each post. These beams stack on edge with each other with a tongue and groove connection. The bottom beam of each span is fitted with a large rubber seal that makes contact with the foundation surface thereby achieving a water tight seal. No fixture points are required, making an extremely aesthetic system when not installed. The end posts of a linear installation can also be mounted internally within the wall structure making it even more unobtrusive.

This system can be supplied in almost any configuration from closed circles and rectangles to linear “straight”’ runs of any length and a maximum height of approximately 9 feet. It can also be engineered to accommodate slopes of 20 degrees, and be supplied a stepped format for greater gradients. Each application will be engineered to suit its site-specific conditions optimizing the system’s reaction time and effectiveness.

ANSI/FM 2510 Performance Testing

Floodproofing.com conducted third-party testing of the Flood Panel Mega Flood Log in accordance with the ANSI/FM 2510 hydrostatic and impact performance standards.

Two configurations were tested:

12-ft. W x 5-ft. H with mid-span post
5-ft. W x 8-ft. H

Seepage Results:

12-ft. W x 5-ft. H - PASS (0.01 gallons/hour)
5-ft. W 8-ft. H - PASS (0.01 gallons/hour)

Impact Results:

12-ft. W x 5-ft. H - PASS
5-ft. W 8-ft. H - PASS

Request Full Report

A large building with a lot of windows and a lot of potted plants in front of it.

Easy Storage

Custom storage shelves are available to ensure Flood Logs are organized and ready to be deployed when needed

A bunch of metal pipes are stacked on top of each other

Nature's Symphony

Breathtaking colors of our planet

A room with a few shelves and a camera on the wall

Faces of Humanity

Portraits of people from around the globe

Button

A warehouse filled with lots of metal shelves

Sands of Time

Stark beauty of desolate dunes

Button

STANDARD WALL MOUNTS

Below is our standard wall mounts that we offer with our Flood Logs. We can also customize the end channels to meet with job site conditions and aesthetics.

A black and white drawing of a flood log

Offset Mount

Offset wall mount provides an offset when the barriers need to make room for trim, door handles or other protrusions. Most popular mounting type.

Jamb Offset Mount

Jamb Offset Wall Mount has a smaller profile than the OSW. Great for areas with limited wall space.

A black and white drawing of a flood log on a wall.

Jamb Mount

Jamb mounts can be used in combination with our offset mount when one side of the opening has a 90-degree wall. It can also be used in jamb-to-jamb conditions.

"Z" Mount

The Z mount allows the channel to mount within the lamb to minimize the aesthetic impact on the building. The Z design also gives an offset to go around any protrusions.

INTERIOR & CUSTOM WALL MOUNTS

Interior Mount

Interior Offset wall mount allows the flood barrier to be on the interior when an exterior barrier is not an option. The compression bolts are reversed allowing the system to be accessed with the door open.

A black and white drawing of a door with a flood log.

Extended Offset Mount

Flood barriers may need an extended offset but not enough for a U-shaped corral. Our offset mount can be extended 1' 6" to ensure nothing is in the way of the barrier, like a gas meter or architectural detail on the building.

Custom Interior Mount

Interior mounts, like exterior, may have limited mounting space. We can customize solutions to ensure the barriers will fit within the space provided and work as intended.

Custom Jamb Mount

For every problem, we have a solution! Our customized mounts allow us to provide you with a flood barrier that works as intended within the space provided.

CUSTOM WALL PLATES

Wall plates are perfect for creating the ideal conditions (flat, level and, paper-smooth), however, the building finishes and aesthetics may not allow for a flat wall plate. We can customize our wall plated fit within the building conditions, to the barrier is attached to the structure of the building and finishes can go around the plates.

A black and white drawing of a brick wall

Flat Wall Plate

Flat Wall Plates are mounted permanently to the structure. They come in standard sizes or can be customized to be wider and/or taller to match building aesthetics.

A black and white drawing of a storefront window.

L-Angle Wall Plate

L-angle wall plates are great in helping conceal the flood barriers. Attaching to the face of the structure and creating a jamb condition for the flood barriers to attach to. The angle can be customized to match the thickness of building finishes.

Hat Wall Plate

Great for buildings that have finishes that will not allow the flood barrier to attach directly to the face of the building. The hat channels attach to the structure of the building and allow finishes to butt up against it. Channels can be customized to match the thickness of building finishes.

FINISHED WALL PLATES

When aesthetics are a main factor in determining the best design, we have the ability to provide a finished look that blends nicely with the architecture of the building and still provides an adequate sealing surface for optimum performance